September 19, 2012
IMTS - The International Manufacturing Technology Show 2012 Proves Continued Strong Manufacturing Picture
IMTS 2012 Registration Reaches 100,200 Marking the Highest Show-to-Show Increase Ever
Chicago, IL – Results for the 29th edition of IMTS – The International Manufacturing Technology Show 2012 prove the continuing leadership of manufacturing in the overall economy as Show Management reports the strongest results in more than a decade. Hosting exhibitors and visitors from 112 countries, IMTS 2012, which ran Sept. 10-15 at Chicago’s McCormick Place, covered 1,240,863 net square feet of exhibit space with 1,909 exhibiting companies.
Total registration for the six-day event was 100,200, which is a 21.6% increase over 2010, marking the largest show-to-show increase ever for IMTS.
Additive manufacturing, multi-spindle machines and multi-tasking machines were stars on the show floor.
Spotlighted both in the IMTS Emerging Technology Center (ETC) and in several exhibitor booths, additive manufacturing continued to gain traction as a production process and excite visitors to IMTS. Recognized as the next major manufacturing breakthrough, this technology can reduce prototype and part development as well as eliminate waste.
The productivity improvements and accuracy showcased by dozens of exhibitors with new offerings in multi-spindle and multi-tasking machines and automation drew serious attention.
"The energy level among visitors and exhibitors was at an all-time high," said Peter Eelman, IMTS Vice President – Exhibitions and Communications. "The most exciting take-away from IMTS 2012 is what it says about the prospects for manufacturing over the next year. The overall activity and buzz indicates that we are entering a period of sustained growth that will fuel economic prosperity and job creation. Visitors came to find solutions and innovative approaches to their manufacturing challenges. They found immediate answers throughout the four halls and long-term possibilities in the ETC."
Significant Orders Booked During IMTS
The show had a remarkable display of new and emerging technologies that will continue to revolutionize the manufacturing world. These innovations, coupled with traditional equipment, offer solutions to all manufacturers who seek increased productivity and lower cost.
"Sold" signs on machines could be seen throughout the show.
Exhibitor MAG enjoyed tremendous success booking a $36 million order during the show. To support its Airbus A350 and Boeing 787 programs, Aerospace Dynamics International launched a major capacity increase in titanium machining with an order for eight MAG five-spindle, five-axis XTi profilers – 40 spindles total on a new machine platform that will increase ADI's Ti machining capacity almost 40 percent, as part of a $90 million expansion that includes new facility. According to MAG, ADI's machinery purchase is one of the largest single aerospace orders in the history of the company in terms of total value and number of spindles.
Royal Master Grinders John Memmelaar Jr. President said, "Customers came with very specific objectives and were looking for solutions right on the show floor. With our full complement of mechanical, electrical, applications and sales engineers onsite, we were able to do projects at IMTS." Royal Master Grinders booked three orders at the show and expects to book an additional four in the next 30 days.
IMTS – Industrial Automation North America Partnership a Resounding Success
IMTS teamed up with Deutsche Messe AG to co-locate the first-ever Industrial Automation North America with IMTS. Industrial Automation North America showcased products and solutions for production automation, complementing IMTS' focus on manufacturing technology, metalworking and precision manufacturing. Exhibit space sales exceeded expectations and as part of the agreement to extend the partnership to IMTS 2014, Industrial Automation North America will occupy additional space.
IMTS Feeds Industry Hunger for Education
IMTS has answered the industry call for education with an increased offering of opportunities. "We've come full circle because in the early years IMTS was actually an educational event, and only turned into a buying/selling forum after World War II," Eelman explains.
Along with the IMTS 2012 Conference that featured 72 sessions and educated more than 500 participants, the show co-located six conference programs: IANA Global Automation & Manufacturing Summit, The International Society of Automation (ISA), The Motion, Drives & Automation, the EHS Today America's Safest Companies Conference, TRAM³ Aerospace Conference — Trends in Advanced Machining, Manufacturing and Materials, and Midwest Clean Tech 2012.
Organizers of each conference agreed that the education component was well-received. Across the board, the quality of speakers and presentations received high marks from participants.
Other IMTS 2012 Highlights
Along with the healthy traffic on the show floor, other highlights included the ETC featuring a Local Motors Rally Fighter car, built live right on the show floor, as part of the Collaborative Manufacturing section of the ETC. The car build team compressed five weeks of work into five days with the Rally Fighter being unveiled before a large crowd on Saturday. Local Motors is the first disruptive U.S. automaker to enter the market in decades, and is built on the principle of collaborative manufacturing. The designs for its cars come from an open source design community.
Also spotlighted in the ETC was a constantly busy display of additive manufacturing, MTConnect® the open-source communications and interconnectivity standard for manufacturing equipment and devices, and MTInsight the game-changing customized manufacturing business intelligence system.
AMT Manufacturing Stage Draws Crowds
Drawing crowds each day of IMTS, the all-new AMT Manufacturing Stage welcomed Acting U.S. Commerce Secretary Rebecca Blank, Senior Vice President Deutsche Messe AG Wolfgang Pech, AMT President Douglas Woods and Local Motors President Jay Rogers to kick off North America's pre-eminent manufacturing event. Michael F. Molnar, Director-Advanced Manufacturing National Program, and Chief Manufacturing Officer-National Institute of Standards and Technology presented, as did Harry Moser, founder of the Reshoring Initiative.
First-Ever IMTS Job Center Addresses Industry Need
IMTS expert job partners from Trillium CNC / CNC Jobs hosted the first-ever Job Center. Manufacturing professionals were able to search available jobs and post resumes. Employers had the opportunity to post open positions. "It was a huge success. We averaged almost 20 new companies each day posting openings that resulted in several hundred opportunities at every level from CNC operator to president of a company," said CNC Jobs Director Bob Lawson. On the applicant side, the Job Center attracted almost 75 candidates each day and will continue to make matches post-IMTS.
IMTSedu, part of IMTS continuing education efforts, ran a full curriculum during the show. In addition to numerous presentations featuring speakers who come from the industry and have been very successful in using Social Media to expand their business, other highlights included a popular session on business trends and conditions for 2012.
The NIMS Student Skills Center at IMTS was a hugely successful event with 9,325 students and educators visiting the 27 student-focused exhibitors.
Before visiting the halls, students had exploration time in the Skills Center where they experienced live demos by 3D Systems, the American Welding Society and Lincoln Electric's Careers in Welding Trailer complete with VRTEX 3D Welding Simulators, a replica of the Chilean Miner Rescue Capsule plus video teasers from The Edge Factor, and robot cells offering hands-on simulators from FANUC Robotics. Career Launch Pads debuted with interactive information desks staffed by young industry professionals who spoke with students about skills, technologies and careers.
Spotlighting the Exciting Results of Applying Manufacturing Technology
Exhibitors and IMTS' media partners increasingly spotlighted end user products that result from the application of manufacturing technology.
GIE Media presented Today's Technology Center, mirroring their publications' content, with a Wright Brothers plane and flight simulator as well as three Drones that showed the transition from the very birth of flight to today's pilot-free aircrafts, a Buckeye Bullet car which holds the land-speed record for an electric car, a simulated human body with which visitors could interact, and a residential windmill.
Gardner Business Media's Advanced Manufacturing Center, with a theme of "Celebrating Advanced Manufacturing," featured a Boeing Fuel Cell Demonstrator Aircraft (FCDA), three-time X-Games gold medalist "Monster" Mike Schultz who has been a trailblazer in prosthetics fabrication since losing his left leg in a snocross accident in December 2008, a Lotus Formula 1 race car and the Virtalis Virtual Reality Theater, which allowed attendees to see the power of the relationship between design, manufacture, and data — all in virtual reality.
"The 'Be There' theme for this year was conceived to communicate the importance of coming together to learn, solve problems, innovate and network," said Eelman. "As we hoped, IMTS was a the place both exhibitors and visitors could accomplish their goals."
IMTS 2014 will run Sept. 8-13. "An enormous amount of strategic thinking, talent and energy went into making IMTS a major success," said Eelman. "As we look forward to 2014, we will move ahead with innovation and technology advances that will keep manufacturing technology growing and vibrant for generations to come."
For more information and to register, visit IMTS.com.
Conversations within the IMTS community are going on @ Twitter: https://twitter.com/IMTS_2016 or @IMTS_2016
IMTS – International Manufacturing Technology Show
The largest and longest running manufacturing technology trade show in the United States is held every other year at McCormick Place in Chicago, Ill. IMTS 2016 will run Sept. 12-17. IMTS is ranked among the largest trade shows in the world. Recognized as one of the world’s preeminent stages for introducing and selling manufacturing equipment and technology, IMTS attracts more than 114,000 visitors from every level of industry and more than 112 countries. IMTS is owned and managed by AMT – The Association For Manufacturing Technology. www.IMTS.com
AMT – The Association For Manufacturing Technology
AMT – The Association For Manufacturing Technology represents and promotes U.S.-based manufacturing technology and its members—those who design, build, sell, and service the continuously evolving technology that lies at the heart of manufacturing. Founded in 1902 and based in Virginia, the association specializes in providing targeted business assistance, extensive global support, and business intelligence systems and analysis. AMT is the voice that communicates the importance of policies and programs that encourage research and innovation, and the development of educational initiatives to create tomorrow’s Smartforce. AMT owns and manages IMTS — The International Manufacturing Technology Show, which is the premier manufacturing technology event in North America.
- AMT - www.AMTonline.org
- View IMTS videos on the IMTS YouTube Channel - www.youtube.com/imtsvideos
- Follow IMTS on Twitter - @IMTS_2016
- Like IMTS on Facebook - www.facebook.com/imts.show
- IMTS on LinkedIn